|
I would check the (two) conections you made when adding the kit.
I had the same issue with both my 95 and 96. When I put the kit inline the wires were pulling free of the conecters. They looked fine, but were not. There just is not enough extra wire. I used a pair of needle nose plyers on the crimps and that solved the problem on both cars. If I did it again I would solder the conection.
__________________
David
96LSi 102k Laguna Blue
95 LS-L AWD, Safety package, 140k Polo Green
the Chick Magnet:
91 Justy GL EFI 4x4 154k (new motor @120k)
90 Yamaha V-Max
82 Yamaha XJ650LJ Turbo
My Diver Propulsion vehicle:
88 Jeep Cherokee 160k
"U-sta-have"
88 XT6 AWD Pearl,
86 XT Lt Blue,
85 XT AWD/4x4 Turbo Space Blue
Last edited by ssnsltd; 08-14-2005 at 08:59 AM.
|