Was wondering if you guys use a gasket (rubber or cork) or the fujibond type rtv to seal your tranny pan. Mine has developed a slight leak on driver side rear and there is a gasket there but it looks slightly distorted in spots, maybe from over tightening the bolts dare I say
Anyway I bought a new pan and bolts. Svxcess had brought it to my attention that starting in late 95 or around that time frame, subaru no longer used the gasket on the tranny pans and used strictly the fujibond sealer. Then I read on a corvette forum that using the sealer is risky that a piece could break off and get caught in the tranny and to stick with the gasket. Would like your opinions and suggestions. Thanks