Thanks aredubjay & svxcess
Well we finally got above 40 degrees yesterday so I figured I may as well install the hood emblem.
As svxcess suggested, I removed the hood latch (2 - 12mm bolts). This uncovers a 1/2" dia hole through which you can see the two yellow clips. I used a flat blade screw driver thru the hole to push against one, then the other yellow clip. The old emblem came off without too much resistence.
I made sure to clean all the old gook off the hood, then put the new emblem on - Looks great.
__________________
Colin
96 SVX LSi 85K (Sold)
04 Legacy Sedan 121K
06 Chevy Malibu 71K
13 Outback 0K
|