Quote:
Originally posted by kuoh
How did you finally get it loose? I was helping a friend replace his belt and he wanted to do the seals, but we just couldn't get the cam bolt loose. We even got an air wrench and took out the headlight for a straighter shot at it. Either the airwrench was broken and couldn't put out the 240+ ft/lb of torque or it was seriously overtightened.
KuoH
|
I also had an impact wrench and removed the headlamp assy. But I got mad and would try anything so......
Disclaimer: This is what I did. Don't try this at home.
I used a double open end wrench. (I think the one I used was 1/2 and 9/16.) Anyway, I put one end of the wrench around one of the sprokets on the inside of the pulley and the fenderwell had a hole in it perfect for the other end. Thought I was going to break it with, but used a cheater bar (about 2 foot) to help me out.