Quote:
Originally posted by Whoru465
2. When running the add-on B&M cooler, should it be placed in series before or after the stock cooler?
|
You're either going to get tons of responses because there are so many different opinions, or you're going to get no responses because we're all tired of discussing the topic.
I took the stock cooler out of the loop entirely on my car. That way the ATF doesn't come in contact with the radiator at all. But if you really want to leave it in the loop, I'd connect it before the aftermarket cooler. The B&M will undoubtably cool better than the stock cooler, and placing the stock after the B&M just means you're going to heat it back up again.
It should be noted that I have no raw data to back this opinion up with, but then nobody else does, either.