[TomsSVX]

So since it's slumbering, I found a couple leaks. Rear main housing was aftermarket, and I now seriously regret using it. I pulled the engine back out again because I can't pull the trans without dropping the engine due to bulkhead space. While it is out I removed the subframe and steering rack. I depowered the rack, which was a used unit and also leaking. I installed a new oem rear main seal housing and will be reinstalling the engine and subframe tomorrow hopefully.

While the engine was out I decided to heat wrap my hot side to try and keep engine compartment temps down. Also picked up a turbo blanket as well.

Once the engine etc is back together I will be working on fitting a Nissan versa epas for power steering. I will also be reworking my belts to run with just water pump and alternator. Pics and documentation of epas install to come in the coming weeks

Tom