Howto steal an SVX
It looks pretty straightforward on the wiring diagram.
The security module controls a relay to interrupt the starter circuit. This relay is located up under the dash near where the wires come through from the engine compartment.
It's a 2x2 connector wired as follows:
Pin 1 Blue/Red is the power to the relay coil from fuse 23.
Pin 3 Blue/White is the other side of the relay coil connected to the security module. The module grounds this wire in order to close the relay, which connects pin 2 to pin 4 and thereby enables the starter.
Pin 2 Black/White is the power supply for the starter.
Pin 4 Blue/White goes to the starter via the Park/Neutral switch.
__________________
Subaru ECU and TCU Website
1992 Alcyone SVX Version L
1992 Alcyone SVX Version L
1994 Alcyone SVX S40-II
2004 Subaru Legacy 2.5 SE Sports Tourer
1996 Subaru Legacy 2.2 GX Wagon
1988 Subaru Justy J12 SL-II
|