Quote:
Originally Posted by TomsSVX
It does not matter if there is ABS or not. You reuse the same hubs from the car.. Just route the sensor wires the same way they were on the old subframe. Even if you do not have ABS on your FWD you can use ABS hubs, the sensors and tone rings just don't do anything. There are no spline differences in the hubs themselves, they simply have a spindle/axle stub
Tom
|
Looking at it from that perspective you are entirely correct, of course. I guess I should have made it clear to say that it would not be easily possible, if at all, to convert a non ABS FWD to an ABS AWD car.
I ran ABS hubs on my FWD non ABS car for one bearing iteration. (removed them from my parts car) Once I replaced the bearings, I put the correct hubs back on.
Lee