Quote:
Originally Posted by YourConfused
Could anyone help me find the pin out for the ecu so I can trace the wire to the MAF? I must have found 20 other wiring diagrams, but not what I am looking for. I don't think the search button likes me.
|
Have you checked voltages at the MAF end of the loom as per the figures I have given? Does not matter if you have to test and try to find the right pins, as a voltmeter across any of them can do no harm.
At the ECU end you are looking for a three wire shielded cable connected --- Terminal b4 Battery voltage to pin 1 on MAF.
Terminal b5 Signal voltage from pin 4 on MAF.
Terminal b6 Shield and ground from within ECU, to 2 on MAF.
I hope this will help, if not shout again.