im looking at a set of 19x8.5 adr battle exe wheels that are 35mm offsets
im assuming since the svx is a 55mm offfset and going to a 35mm offset is going to push it outward rather inwards
i have ran 19x8.5 stern st wheels in the past with a 45mm offet with no issues and also 18x8 with a 38mm offset the axis decade wheels
the tires i will be running are 235-35-19s
these are the wheels i have narrowed down to
http://www.ebay.com/itm/110800314596...84.m1438.l2649
http://www.ebay.com/itm/300642661017...84.m1438.l2649
http://www.ebay.com/itm/150713778410...84.m1438.l2649
these are a great match but not much of a outer lip on them but they 19x8 40mm offset i could still use 235s on them with no issues
http://www.ebay.com/itm/390375926586...84.m1438.l2649
these i like a lot but im worried abought the offset of 35mm
this was my pearl svx with the same stern wheels 19x8.5s 45 mm offset
i have rolled the fenders for the new wheel sizes already
im assuming the lower the offset number the farther out the wheel sits ?
http://www.1010tires.com/Wheeloffsetcalculator.asp
im open to sugestions and which ones you like best,
thanks every one =>