[huck369]

Originally posted by svxed
Ok I have my 5sp from a 92 legacy but I have a question about the clutch cable connection. The clutch cable connection on the trans side seems to have two hook ups. One that connects to the throwout bearing fork and the other to a bracket near the starter. My problem is that the cable seems to pull the wrong way. I have never seen it installed in a legacy. Does any one know how the installation of the cable should go? Is there another bracket I didn't get? Does anyone have a parts or picture brakedown of the trans and cable assembly? Thanks for all the help!!!


Rob

The cable should pull the clutch fork toward the front of the car when the clutch pedal is pressed this will push in on the pressure plate springs, adn release the clutch.
There shold be only one bracket on the tranny near the starter, and the clutch fork, you adjust the tension on the stationary bracket.
Hope this helps,