Yeah, what he said. ^^^
Sometimes oil will turn to shellac and cause the pulleys to stick or moisture will collect and start a little surface rust. Either way put the center bolt back in about 4-5 threads, place something behind the pulley and pry forward while tapping the end of the center bolt - that should help you 'walk' the pulley off. Don't forget to remove the bolt to get it all the way off. <grin>
A little oil might come out but only a thimble-full or so.
__________________
ASE Certified Master Automotive Technician w/L1.
ASE Certified Master Medium/Heavy Truck Technician.
Certified EVT (Emergency Vehicle Technician)
|