|
U-Joints from Canada.. for propellor shaft
I put Euro-Drive C-Clip replacement U-joints on my Propellor shaft.. Finally all 3 seemed to work. First time I tried.. it was worse than prior.. probably got needle bearings outta wack??? Had to balance rear section (will probabaly take front section out to balance to completely remove any vibration [small now]). 95% smooth now.. . 
Not easy!!! 
__________________
Jim
1995 Laguna Blue SVX AWD L - 240K (daily driver) - "ReBuILT" used engine at 236K miles (6/13)
2013 Veloster Red - Driver Now??Dropsprings [1/2" rear, 1" front] with Koni Strut Inserts> Magnaflow Exhaust System> ECUTune Stage 1av1 Upgrade (from 1v4)> ECUTune TCU MOD> Aluminum Crankshaft Pulley> Stainless Brake Lines> Phenolic Spacers> Perforated Brake Rotors (dint like, OEM now)> SmallCar Shift Kit (resting since TCU MOD)> 7-Position Ground System> High-Pressure Fuel Pressure Regulator (resting)> ATF Cooler & Campaign Filter> Yellow Polish Polyurethane Bushings> Pioneer Double-DIN Stereo with JL AUDIO Speakers> Driveshaft Rebuilt with C-Clip U-Joints> 15 Min MOD> 20 Min MOD .. . (2011)
 Valentine One Radar Detector with Remote Display - ucan'tseeme! 
|