Re: I had to INSTALL it. There was none
Quote:
Originally posted by oneothefewproud
Then I definatly miss read it. When i got the Res off and got it cleaned up. Tons of crap on it. Oil and dirt and sand and etc etc etc. The ring, i can not call it an o-ring cus it wasnt that shape. The ring there looked like a beveled ring. If you cut a cross section of it it would be a triangle. But I bought the kit of o-rings, $19 for 100 of them, (dman it). so i have way more than I need. But noone at any parts store could tell me what size it was.
Just renewed my lack of confidence in the (3 Brothers) Manny, Moe and Jack@ss. Morons.
No leaks thus far. Tonite I will open the hood and check for a leak. Since today was the first real test. Highway speeds and the long comute in to work.
Thanx again
Wayne
|
Yeah, the "bevel" was part of your problem. Notice how nice and round the new o-ring is. The compression of the reservoir against the pump is what causes the "bevel" and eventual breach of the seal. I'm glad you got the job done.
__________________
Randy Johnson
3rd Registered Member 02-21-2001
First Member to Reach 10,000 Posts
First to arrive at the very first Reading Meet
Subaru Ambassador
1992 SVX PPG Pace Car Replica 110+k
1993 White Impreza L 240+K miles
2001 Legacy Outback Limited Sedan 250+K miles
2013 Deep Indigo Pearl Legacy 3.6R 49+K miles
"Reading is my favorite Holiday"
Mike Davis -- at Reading VI
|