Quote:
Originally Posted by Ryushin
...BTW, someone mentioned using a 30 mm to put the main seal and cam seals back in. Let me said for the record, it's very hard to find a 30 mm socket. Denver, Colorado isn't exactly small, and calling around everywhere didn't turn up a metric socket that large. So if you are planning on doing this work yourself, buy the socket online/whatever before you do the work...
|
One of the most beneficial first posts I've ever seen
To tap the cam and crank seals in, I took the seals to Home Depot and found a PVC pipe coupler fitting that was the perfect size, and it cost less than a buck. And the best part is that it is common enough to be found at almost any hardware store.