Quote:
Originally Posted by SoobCrazy
Except for a couple of points:
1) The projector selected for the SVX headlamp low beam has a pretty poor distribution of light out of the box.
2) The OEM SVX projector was designed for a halogen lamp, not HID, not LED, halogen. YOU CANNOT INSTALL A NON-HALOGEN BULB INTO A HALOGEN LAMP. This a crime in all 50 states. Physics shows us that the source of light and the lamp used to harness that source must be designed as a unit, you cannot mix and match lamps and light sources.
|
Thought we were talking about the clear lenses, not HID vs LED vs Halogen...
though to compensate for the focal length of the halogen projector you could put a spacer on the back of the projector if you know what size you need for the HID your using. Though really it would be much better to retrofit a d2s projector into the svx headlight housing, probably not even that difficult since oem was projectors.