Eyeballs
<<The nozzles are of an "eyeball" construction, and should be "aimable" by using s thin piece of wire or a needle>>
I cleaned the wax outta mine by removing the eyeballs. An icepick did the trick. I was using the icepick to aim the little metal nozzle when I realized that that can also be removed by twisting them a little further. They just pop out. DON'T LOOSE THEM!
After they where out I ran the pump and cleaned out the plastic nozzle 'holder' (the thing on the hood) then popped the nozzles (er, eye balls) back in and aimed using the ice pick method.
They work great now!
__________________
Jeff
'97 LSi, Ebony Pearl, LSi, 155K
|