|
Something else you might check -- do you get a hum from your ABS box after turning off the car? If so, the relay needs to be pulled,then, replaced.
Loose heat shields, or gravel in the heat shields often causes the rattle somewhere around the Y-pipes, if that's where your sound is coming from.
You may do a search for the "Wiring Upgrade" or "Wiring Mod" to get written instructions. I believe they've been written somewhere here before. If not, go to the "archive" button up top and do a search there. It's been well documented over the life of the two (Yahoo/Network) boards.
__________________
Randy Johnson
3rd Registered Member 02-21-2001
First Member to Reach 10,000 Posts
First to arrive at the very first Reading Meet
Subaru Ambassador
1992 SVX PPG Pace Car Replica 110+k
1993 White Impreza L 240+K miles
2001 Legacy Outback Limited Sedan 250+K miles
2013 Deep Indigo Pearl Legacy 3.6R 49+K miles
"Reading is my favorite Holiday"
Mike Davis -- at Reading VI
|