|
Re: Need help after engine reseal and cam install
Thanks for the responses so far, so with the left side pully mounted it is lined up with the Timing marks and the right side pully mounted the pulley timing marks don't line up on that side yet the crank and the left side are lined up. So if I rotate the crank would that move all the positions at the same time so either the right side will never line up with the crank and left side cam pulley or it will slowly rotate into position with the crank and left?
Last edited by sowise; 12-03-2009 at 06:33 PM.
Reason: referenced the Timing marks not pulley to cam markings
|