Quote:
Originally posted by henryb
Thanks for the quick response. Regarding the Power Light, it does not flash at startup. It does come on for a few seconds as it normally does at startup, then it goes out.
I am not at home today (visiting relatives), so I won't be able to lift it up on jacks until Friday. I will give that a go when I get home and respond back then.
Thanks again,
|
If there is no code posted, it is likely that the Transfer clutch is not working. Either the clutch plates are worn, or the C solenoid valve assemble is stuck in the off position.
The back of the box has to come off to replace the parts, not a big job, the box doesn't have to come out.
Till you get it fixed, try not to spin the front wheels, as it can damage the front diff.
Harvey.