This short block is for sale now. The specs and pictures of the build are of course in this thread: pages 1 through 4.
The high lights are:
Ballanced past 12,000 rpms
Coated ECUtune high silicon aluminum main bearings
Coated ECUtune high silicon aluminum rod bearings
Perfect oil clearances with tolerances 20x more precies than OE
Eagle H-beam rods with arp 2000 rod bolts
8.5 compression forged pistons with thermal barrier top coating and anti scuff sidewall coating, tool steel pins, and stainless rings
.0015" step deck
In short the most awesome short block you could build for forced induction, fully documented, fully proven, and broken in with about 3,000 miles and a 7800 rpm red line. $2,900
