View Single Post
  #10  
Old 05-27-2009, 12:21 AM
svxcess's Avatar
svxcess svxcess is offline
Super Moderator
Alcyone Gold Contributor
 
Join Date: Feb 2001
Location: Westminster, MD
Posts: 6,747
Significant Technical Input Registered SVX Classic SVX
Re: Eliminate pre-cat sections. Bad idea?

Quote:
Originally Posted by SVX Maxximus View Post
I will plan to do 2" off the headers, including the O2 sensors. Then into AeroTurbine AR20 resonators, with more 2" into the main cat. What diameter pipe comes off the main cat headed towards the resonator before the muffler? I would need a Main Cat with that diameter single outlet, and the 2" inlets. Any model suggestions? Is there an O2 sensor on the Main Cat, giving our cars 3 of them? Thanks!
The pipe that comes out of the rear of main cat, into athe resonator and all the way back to the rear muffler is 2.5"

The main cat you would need is the Magnaflow 94007, It has dual 2" inlets and a single 2.5" outlet. The 1992 SVX only has the 2 O2 sensors in the headpipes.

The third O2 sensor in the main cat did not show up until OBDII in 1996. That cat would be the 94037 (with the O2 bung)


The stock resonator has been known to fail quite oftenand have broken baffles with age, causing a buzzing or rattling under acceleration about 2500-3000rpm.

The option I used was to replace it with the Aero Turbine AR25 resonator, which is the same inlet/outlet diameter (2.5") as the stock resonator. Welded into the same position as the stock one.


You can see my third O2 sensor mounted in the pipe behind the main cat. Gives a cleaner reading there and is much easier to change than at the top of the cat.

.
__________________
.
Subaru Ambassador

1996 Polo Green LSi #216..138,100 miles...SOLD

JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan

In-Service Date: January 2, 1997



"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)

HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.


R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016

2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback

2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields.


4th Registered Network member —2/21/2001

My NEW locker..I...My Email..I..Wikipedia/SVX .

.

Last edited by svxcess; 05-27-2009 at 09:42 PM.
Reply With Quote