Quote:
Originally Posted by NiftySVX
M 10 is the plug size on the pump, I have one set up on my car but I took it off for fear of line failure and spraying 176 degree atf in my interior at 275 psi.
|
Thanks a lot. I will be careful with the installation.
I was under the impression that you had monitored the pressure after the C solenoid. However you may have done this in addition to the overall line pressure. If so where did you connect for the after C pressure measurement. As you have reported this is certainly interesting to observe. I happen to have another gauge which would be suitable.
Cheers, Trevor.