replacing the solenoid isn't overly hard, just time consuming - have to pull the driveshaft and take off the transfer case housing - careful the wires aren't too long. The search button is your friend - try "solenoid and transfer".
But, have you done a pressure test on the AWD section? It could be the solenoid is working fine, but the plates are worn over time - and worsened by differing tire sizes/pressures not set correctly.
if you have a good internet connection download the tranny manual in my locker. part 2 has disassembly instructions, part 3 has assembly. BTW, I have not personally done this repair so your use of the words & pics in the manual is at your own risk.
|