[SVX92-97]

My 97 Ebony has been at OT's since 9/14/12 getting tons of work done to put it in the condition it should be. Here is a rundown of whats been done so far.




MAINTENANCE REQUESTED:
Replace head gaskets (customer parts)
Replace timing belt and idler pulleys (customer parts)
Replace water pump (customer part)
Thermostat cover modification
Replace thermostat (customer part)
Oil pump modification
Reseal engine with new gaskets
Replace Vacuum/ PS/ ATF/ Coolant hoses
Replace PCV valve
Replace I.R.I.S. valve
Replace spark plugs
Replace P/S idler pulley
Replace A/C idler pulley
Replace knock sensor #2
Replace 6 coil packs (customer parts)
Replace emissions valve
Replace front and rear brake calipers (customer parts)
Replace front and rear brake rotors (customer parts)
Replace front and rear brake pads (customer parts)
Install stainless steel brake lines (customer parts)
Flushed, refilled and bled brake system Valvoline DOT 3/ 4
15 minute suspension mod
20 minute suspension mod
Oil change and oil filter
Replace front and rear swaybar bushings (customer parts)
Replace steering wheel (customer parts)
Replace transmission shift handle (customer part)
Replace main cat Magnaflow 94007 (customer part)
Replace exhaust resonator
Replace 3 oxygen sensors (customer parts)
Install O2 bung for 3rd. sensor
Check crank sensors/ Cam angle sensors for proper operation
Install HID fog lights (customer parts)
Replace broken transmission pan bolt
Repair dented transmission pan