[BigBlueSVX]

so my transmission pan started leaking after I went to a shop to get the ATF changed. When a second shop looked into it while replacing the front diff, they found the whole pan sealed off with silicone, so they said it needed a new pan and just put more silicone on. And it still kept leaking. So here is my dilemna: I have a new pan and gasket to put in to hopefully fix the problem and all the bolts are out, but the pan won't budge. It's sealed to the case, and I can't get enough leverage to pull it off, as the car is only on ramps. Do any of you have any ideas how to pull off the pan or loosen the seal? Thanks.