Thread: FINALLY finished my VC seals and TB swap... Looks like I need a rear main. $HIT!!!!
View Single Post
  #17  
Old 08-16-2012, 05:42 PM
1986nate 1986nate is offline
Senior Member
Subaru Silver Contributor 		 
Join Date: Sep 2008
Location: Meadville, PA-but I'll still travel
Posts: 4,672
Registered SVX
Re: FINALLY finished my VC seals and TB swap... Looks like I need a rear main. $HIT
Quote:
Originally Posted by clarkerussell View Post
Yes, I was planning on just replacing everything back there

So, to do that I need the rear main oil seal and the separator plate, right?

Here are the parts I'm seeing at SubaruParts.com
11831 - Oil Separator $12.99
G78603 - Rear Main Seal $9.45
B50604 - Screws $0.83

Anything else?
Don't get the factory separator plate for the svx. Get the updated one. It's more expensive but is stamped steel. There are different bolts for it. Also, those numbers you have listed next to the parts are not the part numbers. Those are just the numbers that correspond to their diagram.

I'll get the part numbers for the plate and needed screws/bolts in a bit.
Reply With Quote