Re: Re: Installing neon lights
Quote:
Originally posted by nvrmore100
Not that I've done it, or that I know much about the factory alarm (mine had some other alarm in it when I bought it), but that should be very easy. The alarm located in the glovebox should have a switched power source that is activated when you enable the alarm. You simply have to splice into that power and run your lights off them. If there isn't one, you may be able to power it off your door pins sensors, but I doubt they would produce enough voltage to run them.
|
If you want to go to the trouble of "digging" into the headliner, you could tap into your dome light wiring. Otherwise, you'd have to go to the module behind the glove box.
(BTW -- there no such thing as a 92 LSI -- they were LS-L's -- confusing, but true. LSI's didn't come along until '94-97 -- just an FYI)
__________________
Randy Johnson
3rd Registered Member 02-21-2001
First Member to Reach 10,000 Posts
First to arrive at the very first Reading Meet
Subaru Ambassador
1992 SVX PPG Pace Car Replica 110+k
1993 White Impreza L 240+K miles
2001 Legacy Outback Limited Sedan 250+K miles
2013 Deep Indigo Pearl Legacy 3.6R 49+K miles
"Reading is my favorite Holiday"
Mike Davis -- at Reading VI
|