Re: Possible trunk strut alternative
Quote:
Originally Posted by ZMan
I usually put a nut on the threads, then put the threaded end i want to cut off in a vise, cut it, then dress any sharp edges with a file, then unscrew the nut to clean the threads.
|
+1 Like Zman said, make sure there is a nut on first. Makes life a whole lot easier.
__________________
Cam
'92 Ls-L Dark Teal
11:1 CR ECUTUNE pistons
ECUTUNE .256 duration intake/exhaust cams
ECUTUNE STAGE 2AV1 ECU
Z32 MAF/SR20DET injectors
Balanced & Blueprinted
|