View Single Post
  #4  
Old 11-06-2009, 04:58 PM
AUSVX AUSVX is offline
Registered Loser
 
Join Date: Feb 2008
Location: Sydney
Posts: 366
Re: distinguishing between starter motor or ign switch

Ok cool, that sounds like it, I'm gonna look into this during the week.

About a year ago I used to get a couple of click and no starts so I'd have to try a couple of times. Now it's just senstive in the morning, it clicks and then starts in one action.

"Sometimes while the starter motor is turning over I also hear a click."

Is this the problem you have, if so please elaborate.


Do you consider this as a separate issue because I don't know how to elaborate on this. While the starter motor is already in action and turning over it sometimes makes the same click after the starter motor has started turning BUT before the engine starts. It's like midway.

The remote start system doesn't hold the ignition relay long enough to start the car and the car doesn't start because the click took some time away from remote starting the car.

I only use the remote start system on a hot/cold day so when I get back to the running car it will be already hot/cold inside.
Reply With Quote