Got the EvoScan cable and software. Fired everything up and seems to com well, but addresses(request) seems wrong--rpm not htere, batt shows 20 all the time, speedo is on 20 and coolant is -41C. Can not get much else. Not real sure how to use, but did notice each line is able to be edited. I am guessing i need correct requests--can anyone help me out??? It returns ECU 742522. Here are requests that are there with function:
Batt voltage 1335 x *0.08 volts
veh speed 1336 x *2 kmph
engine speed 1338 x *25 rpm
coolant temp 1337 x -50 degC
ing adv 1053 deg BTDC
airflow 1308 x *5/256 volts
engine load 1305
throttle pos 1329 x*5/256 volts
inj pulse 1306 x*256/1000 ms
ISU duty 1307 x*100/256 %DC
O2 avg 130A x*5000/512 mV
O2 min 0000 x*5000/256 mV
O2 max 0001 x5000/256 mV
knock corr 1054 deg
air/fuel corr 1055 x-128 %
atom press 1340 x*8 mmHg
manifold press 1341 (x-128)/85 bar
Please help----kevin