Quote:
|
Originally Posted by stallion
both my arms are literally dead (and i work out 5 times a week too)
soaked it in pb blaster... waited about 5-10 mins... tried... failed... soaked it.. repeated this process for i dont know how long? till my last post i guess. so about 1 hr. part of the thread is ruined, but i can still grip it in a certain angle. I dont have a breaker bar nor a 17mm socket (I have all sockets 15mm and under) so I might just secure a 17mm drain bolt (does anyone know if you can just buy this straight at a parts store? this is the exact same as the oil bolt right?) and go to a shop and have them take it off, then replace it with the new bolt.. i got so frustrated under that dang car because i'm not even at the tedious part yet (taking off 20 bolts) and i cant even get past the noob part!!!!!!
offtopic: the pb blaster soaked into my latex gloves and they ripped.. how cool...
-a very sore and irritated, yet relieved
stallion
|
1.Get the biggest box wrench you have and a 17 MM open/box end wrench
2. Put the 17MM box end wrench on the tranny drain
3.place the box end of the big wrench inside the open end of the wrench that is on the tranny drain and use it as a lever or breaker.