Re: Where is a good place near driver's seat to ground?
Your putting a switch near the center console??
- Any of the screws holding the shifter base to the tunnel.
- Bolts holding the ebrake handle down
Or put a DPST stitch between the manual button and the ECU, one pole will go to pin 4, the other pole to pin 6. Throw the switch one direction and the manual button does Manual, throw it the other and the manual button will do Power.
__________________
Dave
- 03 Baja - 92 SVX - 86 Brat - 08 OB 3.0
|