Re: Changing the ECU to a MegaSquirt II
Hi Tom,
Yes, I cut one tooth off...the MS uses this point as a refererence then. You simply tell it that the gap is a tooth...if you know what I mean. It operates as if there's 12, but when the gap goes past, it substitutes the gap for a tooth and uses the gap as well.
We initially got it going using the standard SVX ignitor and coils, but then had some dramas, so built the MS with some coil drivers on board. We still use the standard SVX coils.
Ultimately, due to their cost, we were going to go to a cheap Bosch 6 post coil and leads...but never got there. Maybe this year.
Matt
|