|
Re: help with code po340 96 lsi
Quote:
Originally Posted by dennyo
Harvey, Thanks for the tip. I did take it out and the tip was clean.I wiped it off to make sure. Then I checked the connector,both pins All seem to be within spec. I have not checked the voltage to it yet.I ran out of time.I'm not sure how to tell if the magnet is 'weak'?
|
There is no voltage supplied to the sensor, the sensor generates the voltage, when the metal piece on the back of the cam gear, passes across the face of the magnet.
You can test it by connecting a meter across the terminals, and pass a piece of metal across the face, it will show the voltage pulse.
Harvey.
__________________
One Arm Bloke.
Tell it like it is!
95 Lsi. Bordeaux Pearl, Aust. RHD.149,000Kls Subaru BBS wheels.
97 Liberty GX Auto sedan. 320,000Kls.
04 Liberty 30R Auto Premium. 92.000kls.
|