Quote:
Clay bar should do the trick.
|
Nope..Though it will clean the paint very well, it wont do anything to the surface that would remove swirl marks
Quote:
I agree with this and you could go a step further and wet sand it then buff.
|
This is sound advice, though it might be a bit extreme. Considering its a 16 year old paint job, the clear coat is pretty well hardened...buffing it back from being sanded would be quite a chore...and an unnecessary one at that.
My advice... either try a better compund (3m makes some very good compounds, can be bought online) or take it to a detailer.