|
Re: adjusting them hi-lo beams?
A little late and with some duplication.
Here's what Subaru and Chilton say.
1. Park vehicle on level ground about 25 ft. from a flat wall and remove any heavy objects from the cargo area.
2. Check tire pressure is correct.
3. Make certain that the vehicle's gas tank is full and that someone is seated in the driver's seat.
4. Bounce the vehicle several times to normalize the suspension.
5. If not using the gauges switch on low beams. The vertical height of the light beams above the ground should be 4 in. less than the distance between the ground and the centre of the lamp lenses for the lights.
6. Use a suitable wrench or socket to adjust the level indicator nut at the end of the level.
7. If using the level the bubble should not deviate from centre of the sight glass more than 2 marks vertically and one mark horizontally.
__________________
|