Quote:
|
Originally Posted by Chiketkd
In regards to the above statement Michael, how well would the Stage 2v3 chip work with an OBDI SVX that has an Impreza fpr installed (fuel pressure raised to 43.5psi, instead of the stock 36psi)?
-Chike
|
That's about the same fuel pressure as with the walboro pump so it would be about the same--should work very well for forced induction. It might be a bit rich for a natrually aspirated car. You'll find the afr flattens out very nicely with the z32 meter and our software, richer in the lower rpms (decell is also improved). A naturally aspirated car should run the stock fuel pressure. A car with forced induction should run raised fuel pressure.