|
It looks to me like the door strike is just set out too far.
On the door jamb, there is that little metal knub with the two phillips screws, loosen them and slide the catch about 1/8" back and tighten. See if the door fits better, if not, move it back another 1/8".
You may want to tape the catch to the body because it will move around very easily. DO NOT take the screws out. they only need to be loosened a little.
The catch slides in any direction so be careful you don't move it up or down or it will be hard to shut the door.
Doug
__________________
1992 LS Touring (6/91) - Currently undergoing a five speed swap
Black over Claret with spoiler; 235,000 miles; Mods: 2002 Legacy 5 speed, ACT Pressure Plate, Excedy Clutch, Short Throw Shifter, Aussie Powerchip
1992 LS Touring (6/91)
Black over Claret with 2.5" setback spoiler; 202,000 miles; Mods: B&M Cooler
1994 LSi (4/93)
Bordeaux Pearl; 198,000 miles; Mods: Weight reduction.
1969 Mustang GT Convertible
1970 Mustang Convertible
2000 Ford ExcursionSola lingua bona est lingua mortua.
My Locker
|