Please don't tell me that this garbling sound when accelerating and turning is my front bearings! I've done the rears twice, the fronts once ("preventative"), and I own a Hub Tamer.. . BUT, I hate doing that procedure! In fact, I really HATE IT! [Haven't I done enough.. . ha!]
Pleeeeez....noooooooo!
Jim
P.S. I delayed doing a right rear bearing a few years ago.. . and it ended up vibrating my suspension there so much, that it damaged my Koni strut insert - I bot a seat belt assembly for the right rear seat because the mechanism wouldn't latch right, or unlatch! {It ended up being bcuz of the bearing vibration jamming the safety mechanism!.. Yikes! Worked fine after I fixed the bearing (returned the seat belt assy!}. Then, I did the job without new seals, cuz I forgot to order them for the job! You can see I'm dangerous.
Sorry.. . I'm rambling.. .
Just tell me it's a half axle, which side.. . so, I can just fix it easily and cheaply now.. . THANKS!
Jim
__________________
Jim
1995 Laguna Blue SVX AWD L - 240K (daily driver) -
"ReBuILT" used engine at 236K miles (6/13)
2013 Veloster Red - Driver Now??Dropsprings [1/2" rear, 1" front] with Koni Strut Inserts> Magnaflow Exhaust System>
ECUTune Stage 1av1 Upgrade (from 1v4)>
ECUTune TCU MOD> Aluminum Crankshaft Pulley> Stainless Brake Lines> Phenolic Spacers>
Perforated Brake Rotors (dint like, OEM now)> SmallCar Shift Kit (resting since TCU MOD)> 7-Position Ground System>
High-Pressure Fuel Pressure Regulator (resting)> ATF Cooler & Campaign Filter> Yellow Polish Polyurethane Bushings> Pioneer Double-DIN Stereo with JL AUDIO Speakers>
Driveshaft Rebuilt with C-Clip U-Joints>
15 Min MOD>
20 Min MOD .. . (2011)
Valentine One Radar Detector with Remote Display - ucan'tseeme!