|
I had them do my valve body as well. I did the install myself, and found it to be easier than I expected. If you have the manuals it's a piece of cake. I made a sketch of the valve body on corrugated and put each bolt into its corresponding spot because there are two diifferent lengths of bolts. I estimated it took an hour to take out because I was careful, but it's really a 20 minute job to remove if you've done it before.
That was 5 yrs ago and it still runs great! Before the valve body was reworked, I couldn't hit "power" mode w/o overheating it, now everythings fine, and can drive it like I want to.
__________________
cbx-man
'92 LSL Liquid Silver / Automatic Level-10 valve body mod / remote filter
'92 LSL Pearl White / 5 spd. IndigoSpeed 11# flywheel / ACPT Carbon fiber drive shaft
'80 Honda CBX in-line 24 valve 6 cylinder
|