Quote:
Originally Posted by dannmarr
Just like the axle nut removal method
|
"Different strokes for different folks" When I had an axle nut that my impact wrench wouldn't budge... with my big old breaker bar I actually lifted the right front side of the car and that didn't phase it... I simply got a 12 ft piece of my 3/4 inch galvanized pipe that was laying around, used it as a cheater bar and sat on it!
The nut loosen up so easy that every time I need to get an axle nut off, first I go get my 12 foot length of galvanized pipe...
It depends on how you spin it, shade tree, or logical mind.
I might even add, if I can help you out of a tough spot, great! If you elect to take an alternate path, I couldn't care less. Even with that there are different opinions, but "
couldn't care less" is correct. so,
could care less (most folks) is not correct.
Keith