Quote:
Originally Posted by longassname
wow. I have a magnesium twin hammer and it's rediculously fast. I only use it in reverse but I've never run into anything it can't undo and the speed is very nice for dissassembly.
|
Bought a 7,000 rpm 500 lb-ft twin hammer today. Got the right side off, but the left side still won't budge. I threw some PB blaster on there, will try again later. I'll try that trick with taking the valve covers off to hold the sprocket. There was no rust or any sign of anything on the bolt I took out. Must be just on there tighter than hell. If I can hold it in place with the valve cover off I'll put a 3 foot breaker bar on my 1/2 inch drive and try that too.
I got the boxes from you today and the paypal.