So, if I took the hub (with bearing) to the machine shop to swap the old to new bearing, how would THEY do it?
AGAIN, should I:
1. Try to rent a Hub Tamer in my area and do it myself? (Beav, you said it wasn't as hard as everybody made it out to be, if I heard you right.)
or
2. Let the dealer put my OEM parts in for a few hundred dollars?
Please LET ME KNOW. . . . . . THANKS!
__________________
Jim
1995 Laguna Blue SVX AWD L - 240K (daily driver) -
"ReBuILT" used engine at 236K miles (6/13)
2013 Veloster Red - Driver Now??Dropsprings [1/2" rear, 1" front] with Koni Strut Inserts> Magnaflow Exhaust System>
ECUTune Stage 1av1 Upgrade (from 1v4)>
ECUTune TCU MOD> Aluminum Crankshaft Pulley> Stainless Brake Lines> Phenolic Spacers>
Perforated Brake Rotors (dint like, OEM now)> SmallCar Shift Kit (resting since TCU MOD)> 7-Position Ground System>
High-Pressure Fuel Pressure Regulator (resting)> ATF Cooler & Campaign Filter> Yellow Polish Polyurethane Bushings> Pioneer Double-DIN Stereo with JL AUDIO Speakers>
Driveshaft Rebuilt with C-Clip U-Joints>
15 Min MOD>
20 Min MOD .. . (2011)
Valentine One Radar Detector with Remote Display - ucan'tseeme!