Henry, the power light will flash at start-up as long as you have the resistor unplugged. The TCU sees it as a "failure" of duty solenoid "A". If you plug it back in, the light will simply come on at start-up, but not flash. The only time you should get a "flashing" power light at start-up is when the TCU is trying to tell you something's wrong.
__________________
Randy Johnson
3rd Registered Member 02-21-2001
First Member to Reach 10,000 Posts
First to arrive at the very first Reading Meet
Subaru Ambassador
1992 SVX PPG Pace Car Replica 110+k
1993 White Impreza L 240+K miles
2001 Legacy Outback Limited Sedan 250+K miles
2013 Deep Indigo Pearl Legacy 3.6R 49+K miles
"Reading is my favorite Holiday"
Mike Davis -- at Reading VI
|