[oab_au]

Originally posted by svxistentialist


Thanks Harvey, [and David] very informative and useful.

Do I take it from this that when I install my positive displacement blower, I will have no need for a different torque convertor than standard?

Or, is there another way of "toughening them up" other than making them hi-stall types?

Joe

No Joe the standard unit will do the job. It will get the power to the trans, while it is still not too high. Don't forget that it is going to multiply the torque to the box at take off. so you don't need it to multiply a higher level than is necessary. That would be the case, if you use a higher stall speed unit. The converter is strong enough to handle the work.

Harvey.