|
Re: Re: Re: ATTN: All Mechanics!!!
Quote:
Originally posted by SVXtypeR
Mucho thanks dude.
Hey, did you get that from the std shop manual? If so, what page, cuz it wasn't in the matrix with the other stats in mine
|
Well mate, Most is written in the manual, the duration, lobe center and lift is worked out from data found in the manual. The lift is from the camshaft section where it gives the base circle and lobe height dimensions.
I think Lee gave me the data for the valve sizes from his Alldata info along with the lift which he said. was about 7mm. This is not what the book says but I have seen a lot of mistakes in the book like "the brakes are 16" on the front and 15" on the back".
May be Todd could measure the cam base circle and lobe height to be sure.
Harvey. 
__________________
One Arm Bloke.
Tell it like it is!
95 Lsi. Bordeaux Pearl, Aust. RHD.149,000Kls Subaru BBS wheels.
97 Liberty GX Auto sedan. 320,000Kls.
04 Liberty 30R Auto Premium. 92.000kls.
|