|
Clearing Codes, non Word
To clear codes (after problem has been resolved):
1) With engine off, stick the blue wires to 1st and 2nd pin in the top row counting from left on the
black connector, with notch facing up.
2) Start car. Shut off car. Remove pins.
3) Read codes to make sure they are clear. No codes = steady blinks at 1/4 second intervals.
and still, so far so good
__________________
Black Betty [Bam a Lam!] '93 UK spec, still languishing Betty
Jersey Girl Silver '92 UK [Channel Isles] 40K Jersey Girl @ Mersea
Candy Purple Honda Blackbird Plum Dangerous
White X2 RVR Mitsubishi 1800GDI. Vantastic
40,000 miles Jersey Girl
|