Mike, I have again checked the wiring diagram but I come up against a blank wall as the MPFI & A/C units are simply shown as black boxes. I need to know what is inside them.
I still suspect the water temp. sensor or the related wiring. How do we know you have not been supplied a dud sensor. This can and does happen. I am sure I gave you advice earlier in the thread re checking the resistance cold which is when the fans should be stopped. Yes did here it is : --
[ If you have an ohm meter you can check it. When cold and unplugged the resistance across the two terminals should measure between 2000 & 3000 ohms. If the resistance is much lower than this you have found your problem.]
This is your next job.
__________________
Trevor, New Zealand.
As a child, on cold mornings I gladly stood in cowpats to warm my bare feet, but I detest bull$hit!
|