Re: jdm svx trans, will it work?
Quote:
Originally Posted by TomsSVX
A USDM TCU will fix the issue and be a lot easier to install. This would be suggestion
Tom
|
A US TCU will not work correctly with a non-US ECU. The US TCU requires an atmospheric pressure signal from the sensor in the ECU. This sensor is only fitted to US ECUs. The TCU will report an error code.
You can work around this by wiring a potentiometer to the Atmospheric Pressure pin of the TCU. You can then vary the aggressiveness of the shifting by turning the potentiometer. It will select the Normal, LowPres1, LowPres2 or Power shift maps as described in the Gear Shift Maps thread. It's like having a 4 position power mode switch.
__________________
Subaru ECU and TCU Website
1992 Alcyone SVX Version L
1992 Alcyone SVX Version L
1994 Alcyone SVX S40-II
2004 Subaru Legacy 2.5 SE Sports Tourer
1996 Subaru Legacy 2.2 GX Wagon
1988 Subaru Justy J12 SL-II
|